Category: Car Gadgets

Best Car Mount Phone Holder for Smartphones

44699924529e36236dc88e4fdfa8081a-image-400x480I received this product at a discounted price for an honest review. I really like this product. It is made very well with really good material. I like that you can adjust the stand to where you want it for the phone you have. I like that the charger comes with two different plugs depending on the phone you have. I have had it on my dash for a week now and it’s never slipped or even started falling down. I like that the charging adapter that hooks to the base is magnetic so that if someone calls you can easily get your phone without unplugging anything. I like that I now have a place to put my phone…

  • The silicone backing of the rubberized car mount holds your phone firmly in place
  • Allows for phones to be used for navigation or dialing without excess motion
  • Convenient magnetic charging port with super fast micro USB 2 in 1 cable.
  • Charge your phone easily and quickly while traveling
  • The charger is magnetically held in place and moves for tangle free cords,Adjustable for all cell phones sizes and car dash styles

This is a very different design and I like it! I’m currently using a suction cup mount, which works well most of the time. However, when the windshield heats up, the suction cup falls off – that’s really annoying.

This kit comes with the pad, 2 stands, cigarette adapter cord, magnetic 2 in 1 cord (Micro USB + Lightning Connector),

Everything is easy to put together except for the stands. I had to stretch and pull the pad in various directions in order to place the pads where I wanted them (you’ll have to mess with the pad 4 times for each of the stands since the stand have 4 pegs – a total of 8 pegs). Good thing though, once the stands are in place, there’s almost zero chance that they will fall out. There’s a ton of holes to choose from so feel free to experiment on placement of the stands.

The bottom of the pad is sticky (it’s not glue or adhesive so won’t leave any residue on your dash). You’ll want to remove the plastic protective film before placing this on your dashboard. The pad stays in place. I’ve done a bunch of running around since I’ve installed this thing and the whole thing has stayed in place. Speaking of stickiness, be warned, if you have pets, their fur is going to find their way on to this pad.

I like that there is a lot of unused space in the front of the pad; great for holding my key fob, sunglasses, and even my cigarettes. The top is grippy, so anything I throw on there stays in place.

The stands are capable of holding a large phone that has a large case. It held my wife’s phone just fine (Note 5 with Otter Box Defender). Charging is very quick, on par with the newest rapid smart chargers.

The material is easy to clean; remove the cables, use soap and water on the pad, then let air dry.

Overall, very happy with this mount. I won’t be going back to my suction cup!

I hope you found this review useful.

I am a product tester and as such did receive this product at a discount, however I am not required or requested to write any form of review in order to receive the discount.

Click to check the current prices: DIY Car Mount Holder

Advertisements Launches Warehouse in Hongkong has launched an overseas exhibition warehouse in Hongkong, China. Established in 2010, is an online business affiliate of e-commerce platform, a Shenzhen based company that connects global retail businesses with Chinese suppliers. The Hongkong warehouse will provide increased access for high-end Chinese goods.

Universal Air Vent Magnetic Car Mount Holder for Cell Phones

This mount works GREAT for the dash of my vehicle. I got tired of squeezing my phone between two clamps of other styles of mounts and figured this would be a low-profile and easy to use mount. I found it held my Galaxy S5 inside of a Slim Armor case without any issues whatsoever. I recently upgraded from that phone and now have a Droid Maxx 2. It’s larger, a little heavier, and has a curved back. I found the smaller circular metal disc fits inside the removable back panel and allows it to securely attach to this mount as well.

The magnets are VERY strong and the phone doesn’t move around at all. I typically keep my phone vertical but when I turn it horizontal for maps or whatever, it stays there. It even stays there when plugged into the charger which left me impressed. I was skeptical of a $12 item, but couldn’t be more pleased. I’m going to order a second for my wife’s vehicle.


This mount is so easy to use. Once you put the metal plate inside your phone case, it snaps on and off with no effort whatsoever. I like the plate mount vs. the vent mount because it doesn’t cover my air vents and gives more versatility to where I can place it. The only thing I’d mention is that you should be sure you angle it exactly where you want it before sticking it because I accidentally stuck it upside down and now the mount won’t rotate as far as I’d like it to. Easily my bad and I could take some goo gone and double stick tape and reposition it easy enough. I also love how you can buy additional metal plates to use multiple phones. Now my husband and I can both use it with minimal effort depending on who is driving.


  • EASY YOU USE: This Air vent universal smartphone magnetic car mount holder is 10 times easier to use than any other magnetic car mount holder due to its simple and complementary design. It has a sturdy rubber base and a powerful magnetic head for holding smartphones.
  • POWERFUL MAGNETIC MOUNT: The reinforced magnetic holder of this mount is what sets it apart from other mounts. This Universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Including Android, Apple, Blackberry and Microsoft devices.
  • UNIQUE DESIGN: This Twist lock is a unique design which you enter the mount into the Air vent and you can lock the mount it should not fall out !
  • STURDY BASE: The high quality rubber construction of the base of the mount is unique and very functional as w
  • SWIVEL MOUNT: Rotate your smartphone and swivel your display as you please. The base of the mount remains fixed into the air vent of your car and does not move, no matter how much swiveling or rotation you do. This guarantees that your smartphone will always remain in your preferred position

This is the 3rd mount I have tried in my Ford Explorer Sport Trac. The vent mount works in my wife’s Enclave with flat vents so that Wizgear model stays in that vehicle. The suction cup mount worked but obstructed my view plus my car doesn’t have a level surface on the dash anywhere. That’s where this model comes in. The 3m mounting tape is strong so you better make sure where you mount it, you want it. I found that this model has a nice surface for mounting. Not too wide to be an eyesore but not to narrow to prevent a firm grip.

I made sure the surface was clean (doesn’t need to be as clean as the other mount) and held the phone on the bracket until I was happy with its location. I have it on the inside of a TPU case but another is on its way to mount the disc on the outside of a case. My truck is a bit rough (hey it’s ten years old) but this magnet held. In the vertical position no issues. In horizontal it wanted to sag a bit to the side that my car charger was plugged in to. Not a big deal.

I also tried this with a thicker case (puregear) but it did not hold as firm in my car. The problem is that with cases with a high gloss finish, unless the magnet is on the outside, the surface becomes too slippery. Again, the TPU case solves this issue and at home or work, when I want to use wireless charging, I just pop off the TPU case.

This replaces an older bracketron cup holder gooseneck generic stand which works great, but I wanted my cup holder back.

This Air Vent Magnetic Car Mount Cell Phone Holder is is a worth contender, brought to you by, quality is guaranteed. Finding the best car mounts for your smartphone in your car can feel like looking for a needle in a haystack.

Car Mount Holder Magnetic Adsorption Stander Charging Cradle Stand for Smart Phones

Car Mount Holder Charging CradleI’ve used couple of dash car mount and this car smartphone dash holder/mount is totally new to me. I’m pleased and impressed with this mount holder because of its unique concept and I like the dual charging cable for iOS and Android phone in a single cable and that looks very neat and convenient so you don’t have to use two different cable if you have a device that uses micro USB, with its magnetic charging connection it is sturdy an has pretty strong magnet and can be rotates and still held in place with no issue on charging. The magnetic cable length is 8 inches end to end and the USB cable is 42 inches which is long enough to reach my cigarette USB charger.

The DIY Car Holder is fashionable creative and well-designed. A lot of unique design make it stand out.


  • DIY Disassemble and Combine. Unique design, easily adjusting the width for your iPhone Samsung Galaxy or any size smartphone.
  • Super Flexible Silicone Material, adapt to different radian and material, polishing at the bottom to achieve better antiskid effect. Perfect adhere to all kinds of arc center console of all kinds of car and adapt to all sorts of driving conditions.
  • Humanized design. Creative Magnetic Absorption Charging Port with Lightning Micro USB 2 in 1 cable. Any time to use your phone when charging. One-hand operation.
  • 120 degree Slant Design. Most comfortable angle of view.
  • Super tough and big size design. High quality and multifunction. Also suitable for work and home or anywhere you want it.

Humanized design:

  • Creative Magnetic Absorption Charging Port. More inconvenient to use your phone when charging.
  • One-hand operation.
  • 120 degree slant design. Most comfortable angle of view whether in the car at home or in the office.

I have tried various designs of vehicle phone holders from ones that attach to an AC vent to others that make use of a suction cup that secures it to the windshield. My favorite and most convenient phone holders so far are the ones that I can quickly place my phone on without fumbling with them too much in order to get them to securely hold the phone. This Remax silicone dash pad phone holder is now one of my favorites because I can start up a GPS map app and then in a matter of seconds place the phone between the cradle legs and be confident that my phone won’t going flying off somewhere in the car when driving. Something to take note is that the cradle legs may not secure a phone in a thick case. The space that fits the phone is only 3/8 in / 10 mm wide but will stretch somewhat because it is made of soft rubber. I’m mentioning this because it is an important thing to consider before purchasing this item.


The greatest feature of this holder that it doesn’t need any sticky adhesives to stay secure on the dashboard which may ruin the finish. Since the holder dash pad is made of silicone rubber that has a glossy smooth finish on the bottom, it has a tenacious grip on most surfaces which includes most dashboards. I say most because some dashboards have certain finishes and textures that may not allow the holder to grip as well as it should and then others sometimes have features such as a section that has compartment that can hold items that would prevent this holder from resting on the dashboard surface properly. I have one such vehicle like that so this holder didn’t work as well on the dashboard in that vehicle but it worked well in my remaining vehicles.

This is the best car mounting system for my cell phone I’ve tried yet. As a Vine reviewer, I have reviewed several different kinds of car mounting systems for cell phones. Most of them clip onto the car’s vent and never seem sturdy enough. Not to mention they block the vent and subject the phone to hot or cold air being blown on it.

This system works by sitting on your dashboard. It is important to make sure to position it so that there are no airbags underneath it. It uses a flexible rubber/silicone base that hold the base in place by gravity and friction and it works under almost all situations. It might bounce off if you go off a jump or hit a very large bump but you should avoid doing that anyway.

There are two clamps, also made from a flexible rubbery material, that can be positioned almost anywhere on the base. These firmly hold in my iPhone 5s and iPhone 6s with a thin case. There is a charging cable that connects magnetically to the base. This is so you can quickly remove the phone from the base and take a call without have to worry about disconnecting the charging cable.

The beauty of the base is that I can use it on any flat surface including on my desk.

This Car Mount Holder Charging Cradle for Smartphone is in stock now, brought to you by the leader in electronic devices as well as Best Car Mounts,

The Best Magnetic Car Air Vent Mount

Magnetic Car Air Vent MountThis Air vent universal smartphone magnetic car mount holder is 10 times easier to use than any other magnetic car mount holder due to its simple and complementary design. It has a sturdy rubber base and a powerful magnetic head for holding smartphones. It features a magnetic technology, which means your smartphone will be secure and have no chance of falling. When a phone is secure in place, it becomes easier to use for GPS navigation too. Sturdy, cradle-less and attractive device holding system. Pretty cool phone on mount. You basically put the magnetic between your phone and your phone case and then apply to your case so that way the magnet is not visible. Then you simply take the other piece and clip it to your car vent. That way your phone stays exactly where you put it on the car vent. I tested it going over train tracks and it didn’t move. I received this item for free in exchange for my honest opinion.

Even though I have built-in GPS I’d much rather use my phone’s maps and GPS. With that said, I am always in search of the perfect way to mount my phone to my dashboard for hands-free use. That’s why I was so thrilled to come across the Aerb Air Vent Magnetic Universal Car Mount Holder. I can’t begin to tell you how awesome this car mounting system is. It’s so easy to use and that’s why I love it. It also has a great rotating ability for ease of use too. You can move it to easily view your mobile phone to any direction easily. My phone has not fallen off the mount at all and fits perfectly into the air vent.

It’s as easy as two steps. It uses reinforced magnetic holder which has an intensive force of attraction and that’s what’s different. It’s made of high-quality rubber materials and you can tell it will last for years to come. I was given this product in exchange for my opinion which is exactly as expressed. This is one of the best car mounts I’ve ever tried and I’ve tried several. I highly recommend it and think it also makes for a great stocking stuffer for the holidays too. I can’t wait to get some for my friends and family.

Love this so much! I have tried so many phone holders that are such a waste of money and don’t work – my phone is huge and I need to take my phone case off in order to make it work. I actually use a huge rubber otter box case. I stuck the magnet inside the case, didn’t tape it down because I”m thinking of getting a new phone, and it works PERFECTLY!! I love it, I bought a total of 5. One for me and four as gifts. Everyone loves them. My brother in law has a Jeep with very large vents so he has to turn his vents vertically but it still works. However, when he was driving down a bumpy off-road, it popped off the air vent. That has never happened to me because I have a Nissan Altima and what I consider “normal” vents, but his air vents are gigantic. He was saying that it worked great for him on normal roads but if you’re an off roader with huge vents, this may not stay.

This Luxury Magnetic Car Air Vent Mount is in stock now, brought to you by the leader in electronic devices as well as Best Car Mounts,

Wireless Qi Charger Car Mount Review

I’ve tried a number of windshield/dashboard mounts, and most of them have worked pretty well, meaning they adhered to the windshield or dashboard without coming loose, and they secured my smartphone to the mount. The ones I didn’t like were the mounts that held the cellphone magnetically or with adhesives. The iOttie Easy One Touch passed my tests with its secure vacuum grip on the dashboard of my car, and the padded grippers that held my phone. A ball-and-socket joint and telescoping arm allows the phone to be positioned in almost any way for the best viewing. The side grippers on the mount expand to take phones up to about 3½” in width, which would include most smartphones made today, as well as some of the smaller phablets. My Moto-X phone fit easily in the mount.

Car Mount Wireless Qi ChargerThese windshield/dashboard mounts are invaluable for many people, and I can’t imagine using my smartphone’s GPS without having the phone in a dashboard mount. If you’re looking for a car or tabletop mount that holds your cellphone securely but releases it quickly when you need to take your phone with you, the iOttie is definitely worth a look.

People that will find this the Car Mounted Wireless Qi Charger useful are individuals that have a qi standard phone that is compatible for qi charging that want a fast and easy way to charge their phone without having wires everywhere but having the phone held in a position that suits them. The holder itself is adjustable so it can support a variety of different size and branded qi charging compatible phones; to adjust it just press the release buttons at the either side of the charger together for the grip to widen.

At a Glance…

  • Wireless Qi Charger
  • Designed to be installed in
  • For Qi Standard Compatible Phones

Manufacturer Specifications


  • Output: DC 5V/1A
  • Input: DC 12V/1A
  • Charging Efficiency: Above 70%
  • Power Source: Car Charger
  • Compatibility: Qi Standard Phones


  • Power IN


  • Main product dimensions: 111x66x54mm (L x W x D)
  • Main product weight: 138g

Note: The adhesive pad on the mount is very sticky, enough so that it was a bit difficult to remove the mount. I recommend that you install it in the right location the first time so you won’t have to strain to remove it. The good news: with the vacuum seal added to the adhesiveness of the mount, it’s not going to move until you want it removed.

A good update on the old design to make it more compatible with larger phones, though it is now a tad more involved to mount the phone, as I often feel more comfortable using both hands to secure it as opposed to the old design which I never felt unsure just using one.

In addition, one of the rubber friction bumpers on the side arms fell off and had to be glued back on. The factory adhesive doesn’t seem to be quite up to the task.

Car Mounted Wireless Qi Charger is a great way to charge why wirelessly as you cruise the open roads. A great way to charge your phone as you hit the highway, the Car Mounted Wireless Qi Charger uses the latest way for wireless charging. Order one today and we guarantee to ship out your order within one working day. Brought to you by the leader in Cell phone accessories,

I just love this product. I’ve had a belkin car mount cell phone holder until it fell off and broke and the suction wouldn’t work anymore. That thing fell off all the time! And I thought I loved that, but man is this so much better. Suction holds up so well. I have it on my windshield so no problems with holes in my dashboard. It adjusts beautifully to however what position I want it to. I just push the side buttons to release my phone and when I’m back I just put my phone down on it and it snaps in!! You can even move the bottom panel to the sides I u can charge while it’s on it! I like my phone in front of me when I play music or use the gps in the car and this has been a lifesaver for me. Haven’t fallen off yet!!

For the past 6 weeks it has held up nicely in my car. I do like the fact that it holds my phone in place and it is easy to remove with just one hand. I wouldn’t recommend putting it on your dash because of the reviews that it might damage your finish. Glass is strong, smooth and easy to clean and would recommend attaching it to either your windshield or other stationary glass.